Node parts

3D-printing list for one node.

All parts were printed on the Prusa i3 mk3 printer using 1.75mm PLA filament, with a nozzle diameter of 0.25mm. The slicer used was the Prusa slicer.

STL-FILES

Part Name	QTY	Link
INNER_RAIL	2	SINTEF TEAMS
MAIN_BOARD_HOLDER	1	SINTEF TEAMS
ADC_BOARD_HOLDER	1	SINTEF TEAMS
ZIPTIE_ANCHOR		https://www.printables.com/model/132296-zip-tie-anchor/files
M5_NUT_HOLDER	4	SINTEF TEAMS

SETTINGS

INNER RAIL

• Layer height: 0.15mm (quality setting)

• Support: no

• Infill: 15%

The rails need a brim around them when printing or else they can fall down during printing and the print will be ruined. Print settings -> check off the skirt option.

The models should be printed in this orientation. (I printed all the rails at the same time)

MAIN BOARD HOLDER

• Layer height: 0.15mm (quality setting)

• Support: yes

• Infill: 15%

The model should be printed in this orientation.

Holder for microcontroller

ADC BOARD HOLDER

• Layer height: 0.15mm (quality setting)

• Support: no

• Infill: 15%

The model should be printed in this orientation.

holder for ADC

ZIPTIE ANCHOR

• Infill: 15%

• Layer height: 0.15mm (quality setting)

• Support: no

• Infill: 15%

The model should be printed in this orientation.

Ziptie anchor

M5 NUT HOLDER (can also be found in m6 variation)

• Layer height: 0.15mm (quality setting)

• Support: no

• Infill: 15%

The model should be printed in this orientation.

Nut holder