Sensor parts

3D-printing list for the sensors

All parts were printed on the Prusa i3 mk3s+ printer using 1.75mm PLA filament, with a nozzle diameter of 0.25mm. The slicer used was the Prusa slicer.

Some parts were also printed on the Bambu labs X1 carbon printer but the settings should be the same.

All part can be found on the projects GitHub page

SCD30

PARTS

Part name	QTY	Link
SCD30_CASING_TOP	1	SINTEF TEAMS
SCD30_CASING_BOTTOM	1	SINTEF TEAMS
OUTER_RAIL	2	SINTEF TEAMS

SETTINGS

SCD30 Case

• Layer height: 0.15mm (quality setting)

• Support: yes

• Infill: 15%

The models should be printed in this orientation.

scd30 - bottom

scd30 - lid

RAILS

• Layer height: 0.15mm (quality setting)

• Support: no

• Infill: 15%

The rails need a brim around them when printing or else they can fall down during printing and the print will be ruined. Print settings -> check off the skirt option.

Rails settings

The models should be printed in this orientation. (I printed all the rails at the same time)

Rails.

AS7450 / BH1750

Part name	QTY	Link
AS7450_BH1750_CASE	2	SINTEF TEAMS

SETTINGS

• Layer height: 0.15mm (quality setting)

• Support: yes

• Infill: 15%

The model should be printed in this orientation.

AS7650 / BH1750 case