Adding new nodes

This page will explain how to add new nodes to The Things Stack

Go into your newly created application

Then select "End Devices"

Then select "Register end device"

Device settings:

These settings are what you need to put into the CubeCell code to enable it to connect to the gateway.

End device brand: HelTec AutoMation

Model: HTCC-AB01 (Class A OTAA) you can also chose HTCC-AB01 (Class A ABP)

Hardware Ver: default

Firmware Ver: default

Profile (region): EU_863_870

Frequency plan: Europe 863-870 MHz (SF9 for RX2 - recomended)

When you are done you should see this

Device type settings for the cubecell devboard v2

Provisioning information:

JoinEUI: you can sett this to what you want but it needs to be different for each device

DevEUI: press the generate button

AppKey: press the generate button

When you are done you should see this

Now press the "Register end device" button to register the device. Now you need to setup the payload formatting script.