Attaching connectors (i2c)

This section explains how to connect the male connectors to i2c sensors like the SCD30 and the MCP9600.

How to attach connectors with I2C

1. Strip the ethernet cable in a appropriate length

2. Unscrew the endpart of the connector, place it onto the wire.

3. 

   Schematic of the connector.

   

   male connector with screw terminal.
4. Place and screw inn the wires as the schematic shows: 1 - Power (red) 2 - GND (black) 3 - SCL (yellow wire) 4 - SDA (green wire)

5. 

   Top view of connector.

   

   Side view of connector.

   

   Side view of connector.

6. Screw back the end part of the connector.

7. 

   closed connector.