AS7341 (i2c)

This page explains how to create and setup the AS7341 Spectrometer.

How to prepare the AS7341sensor.

The only thing you need to do for the AS7341 sensor is to attach it to its case.

1. Place the sensor into its 3D-printed case.

2. 

   Sensor inside the case.
3. Glue the case on the lid of the box. The case should be glued on the clear part of the lid towards the right. Next to the BH1750 sensor

4. 

   Top view of box with sensors.

   

   Inside view of lid with sensors.

5. Now you can go onto soldering the I2C STEMMA Cable wires onto the main board.

Final assemblyThis page explains the final assembly of the node