BOM

Bill of materials and 3D-printed parts for the different types of sensors

NOTE: For a complete BOM needed to setup one node with five sensors including the LoRaWan gateway checkout this link. (link til teams)

SCD30 CO2, Temperature, Humidity sensor:

Name
QTY
Link

SCD30 Sensor

1

SCD30_CASE_TOP

1

Link at the bottom

SCD30_CASE_BOTTOM

1

Link at the bottom

OUTER_RAIL

2

Link at the bottom

TE Circular Connector, 4 Contacts, Cable Mount male

1

Light sensor:

Name
QTY
Link

BH1750 Sensor

1

I2C STEMMA Cable - 200mm

1

AS7450_BH1750_CASE

1

Link at the bottom

Spectrometer:

Name
QTY
Link

AS7341 Sensor

1

I2C STEMMA Cable - 200mm

1

AS7450_BH1750_CASE

1

Link at the bottom

Soil moisture sensor:

Name
QTY
Link

TE Circular Connector, 4 Contacts, Cable Mount male

1

Soil temperature sensor:

Name
QTY
Link

RS PRO Type J Thermocouple

1

RS PRO Heat Shrink, Black 25.4mm

1

MCP9600, Amplifier board

1

TE Circular Connector, 4 Contacts, Cable Mount male

1

3D-printed parts:

Some of the sensors needs 3D-printed parts. A list of parts you need for each sensor can be found in the 3D-printing section.

Sensor parts3D-printing list for the sensors

Last updated